Skip to content
ContentsFormula ReferenceUser guide
Formula Reference

Duct Bend Attenuation

Formula
CIBSE Guide B4 Tables 4.22 / 4.23 (square) and 4.24 (round), or ASHRAE 2023 Tables 22 / 23 (square, radiused) — 90° elbow by f×w, × number of bends
Output
dB (negative = attenuation)
Bands
63 Hz – 8 kHz
Standard / Source
CIBSE Guide B4
Access
Toolbar block

What it does

Gives the attenuation of a 90° bend (elbow) in a duct. Each band's loss is read from a table keyed on the product of frequency and duct width (f×w). A Method switch chooses the data source and an Elbow type switch the shape:

  • CIBSE — Guide B4 (2016): square elbows from Table 4.22 (no turning vanes) or Table 4.23 (with vanes), unlined or lined; round elbows from Table 4.24. A 50 mm lining adds 3 dB to the 25 mm figures, except at 63 Hz (§4.6.4.2).
  • ASHRAE — 2023 Handbook, Chapter 49: square elbows without turning vanes from Table 22, radiused rectangular elbows from Table 23 (unlined). ASHRAE has no round elbow, so a round elbow on the ASHRAE method shows N/A and asks for CIBSE; square elbows with turning vanes (ASHRAE Table 24) give no result.

A block saved before the Method and Elbow type switches existed reads as CIBSE, square, exactly as before. In a Duct run, a bend after a round element starts as a round CIBSE elbow, even in an ASHRAE run.

Inputs

InputMeaningUnitExample
MethodCIBSE or ASHRAEselectCIBSE
Elbow typesquare, round (CIBSE) or radiused (ASHRAE)selectsquare
Widthduct dimension in the plane of the bend; for a round elbow the bore (inside any lining)mm300
Turning vanesfitted? (square elbows)yes/nono
Linedacoustically lined? It should run at least two duct widths before and after the bendyes/nono
Lining thickness25 or 50 mm (when lined)mm25
Number of bendswhole number of identical bends; the per-bend attenuation is multiplied by this—1

Worked example

Width 300 mm, no vanes, unlined:

Band (Hz)631252505001000200040008000
Attenuation (dB)00−1−5−8−4−3−3

Most of the loss lands in the mid bands, where the acoustic wavelength is comparable to the duct width. ASHRAE Table 22 gives the same figures for this case.

The same 300 mm duct as a round elbow (CIBSE Table 4.24, f×w < 25 → 0 dB; 25–50 → 1 dB; 50–100 → 2 dB; above 100 → 3 dB), or a radiused elbow (ASHRAE Table 23):

Band (Hz)631252505001000200040008000
f×w (kHz·mm)18.937.57515030060012002400
Round, CIBSE 4.24 (dB)0−1−2−3−3−3−3−3
Radiused, ASHRAE 23 (dB)00−1−2−3−3−3−3

Source

CIBSE Guide B4 (2016), Tables 4.22 (no vanes) / 4.23 (with vanes) — 90° square elbows, Table 4.24 — round elbows, and §4.6.4.2 (lining thickness), based on the f×w product. ASHRAE 2023 Handbook — HVAC Applications (SI), Chapter 49, Tables 22 and 23 (square and radiused rectangular elbows). Bands 63–8000 Hz.

Register interest

Tell us a little about you and we'll be in touch when Timbral is ready.