Skip to content
ContentsFormula ReferenceUser guide
Formula Reference

SPL in Room (Direct + Reverberant)

Formula
Ltotal = Lw + 10·log₁₀[(Q/4πr²) + (4/Rc)]
Output
dB — total SPL per band
Bands
Follows the Lw spectrum
Standard / Source
General acoustics (no standard cited)
Access
Toolbar block

What it does

Gives the total sound pressure level at a receiver inside a room, combining the direct-field contribution (falling off with distance and directivity) with the reverberant-field contribution (set by the room constant) — the standard indoor near/far-field SPL model. It works band by band on a sound power spectrum (since v0.6.1; earlier builds took a single Lw and wrote the same value in every band). Ribbon: Buildings → SPL in Room (Direct + Reverberant).

Equation

Ltotal=Lw+10 log⁡10 ⁣(Q4πr2+4Rc)L_{total} = L_w + 10\,\log_{10}\!\left(\frac{Q}{4\pi r^2} + \frac{4}{R_c}\right)

Inputs

InputMeaningUnitExample
Lwsound power level of the source (a spectrum row)dB90
Qdirectivity factor (Spherical=1, Hemispherical=2, Quarter=4, Eighth=8)—Spherical
rdistance from source to receiverm5
Rcroom constantm²100

Worked example

In a band where Lw = 90 dB, with Q = 1 (spherical), r = 5 m, Rc = 100 m²:

direct = 1/(4π·5²) = 0.00318; reverberant = 4/100 = 0.04

Ltotal=90+10log⁡10(0.00318+0.04)=90−13.6=76.4 dBL_{total} = 90 + 10\log_{10}(0.00318+0.04) = 90 - 13.6 = 76.4\ \text{dB}

The same −13.6 dB offset is applied to every band of the Lw row — e.g. Lw = 85 / 90 / 87 dB at 63 / 250 / 500 Hz gives 71.4 / 76.4 / 73.4 dB.

Source

Standard direct-plus-reverberant indoor SPL model (see also Reverberant SPL, Room Constant). No specific published standard is cited in the software.

Register interest

Tell us a little about you and we'll be in touch when Timbral is ready.