- Formula
- Near 0 · Line 10·log₁₀ · Point 20·log₁₀
- Output
- dB (negative = attenuation)
- Bands
- Same value at every band
- Standard / Source
- General acoustics (no standard cited)
- Access
- Toolbar block
What it does
A finite radiating plane — a large facade, a big louvre, a radiating panel — behaves differently depending on how far away you stand relative to its size. The block uses the two plane dimensions (a = smaller side, b = larger side) to switch between three regimes:
- Near field (r < a/π): you are close enough that the level barely changes with distance (≈ 0 dB).
- Mid field (a/π ≤ r < b/π): the plane behaves like a line source — 3 dB per doubling.
- Far field (r ≥ b/π): the plane behaves like a point source — 6 dB per doubling.
The transition distances are therefore a/π and b/π. The result is the same at every frequency band.
Inputs
| Input | Meaning | Unit | Example |
|---|---|---|---|
| r₁ | reference distance | m | 1 |
| r₂ | receiver distance | m | 10 |
| a (width) | smaller plane dimension | m | 5 |
| b (length) | larger plane dimension | m | 10 |
Worked example
With a = 5 m and b = 10 m, the transitions fall at a/π = 1.59 m and b/π = 3.18 m. A receiver at r₂ = 10 m is well into the far field, so from r₁ = 1 m:
→ −13.0 dB (−12.95 dB before rounding to one decimal place) at every band from 31.5 Hz to 8 kHz.
(The loss is less than the −20 dB a true point source would give over the same distances, because part of the range is spent in the gentler near/mid regimes.)
Source
Standard finite-plane divergence model (near / line / point regimes). No specific published standard is cited in the software.