Skip to content
ContentsFormula ReferenceUser guide
Formula Reference

NC (Noise Criterion)

Formula
Lowest NC curve not exceeded in any octave band 63 Hz – 8 kHz
Output
NC value (e.g. NC-35), or NC undefined outside NC-15 … NC-70
Bands
63 Hz – 8 kHz (octave; 1/3-octave input is summed to octaves first)
Standard / Source
General acoustics (no standard cited)
Access
Toolbar block, Inline =function

What it does

Rates a measured or predicted octave-band spectrum against the Noise Criterion (NC) curves, the single-number rating widely used for building-services noise. The rating is the lowest whole-number NC curve that the spectrum does not exceed in any band from 63 Hz to 8 kHz. Use it from the Ratings ribbon, or type it into a cell as =NCRATING(E5:M5, 31.5).

How it is rated

NC=min⁡{ N:Lp(f)≤NCN(f) for every band f }NC = \min\{\,N : L_p(f) \le NC_N(f)\ \text{for every band } f\,\}
  • A band level equal to the curve does not exceed it (the classic tangency rating). Levels are compared to 0.1 dB.
  • Blank and zero bands are not rated, so a partial spectrum rates on the bands it has. 31.5 Hz is outside the NC curves.
  • A 1/3-octave row is energy-summed to octave bands first.
  • A spectrum below NC-15 in every band, or above NC-70 in any band, reads NC undefined: Timbral does not clamp it to NC-15 or NC-70 and does not extrapolate.

ℹ️ The curves. NC curves are published at 5 dB steps (NC-15, NC-20 … NC-70). The intermediate whole-number curves are linearly interpolated between them, as tabulated in Timbral's reference data, so a rating can land on any whole number between NC-15 and NC-70. The same curves fill a row from Curves › NC.

Curve631252505001000200040008000
NC-154736292217141211
NC-205140332622191716
NC-255444373127242221
NC-305748413531292827
NC-356052454036343332
NC-406456504541393837
NC-456760544946444342
NC-507164585451494847
NC-557467625856545352
NC-607771676361595857
NC-658075716866646362
NC-708379757271706968

Inputs

InputMeaningUnitExample
Lpsound pressure level spectrum, octave bands 63 Hz – 8 kHz (a row)dBsee below

Worked example

Band (Hz)631252505001000200040008000
Lp (dB)5548403530282522
NC-30 (dB)5748413531292827

The spectrum touches NC-30 at 125 Hz and 500 Hz and is below it everywhere else; the next curve down already lies below 48 dB at 125 Hz, so the rating is NC-30.

Source

The Noise Criterion (NC) curves, NC-15 to NC-70 in 5 dB steps, octave bands 63–8000 Hz; intermediate curves linearly interpolated as described above.

Register interest

Tell us a little about you and we'll be in touch when Timbral is ready.