Skip to content
ContentsFormula ReferenceUser guide
Formula Reference

Composite Transmission Loss

Formula
R = −10·log₁₀[Σ(Areaᵢ·10^(Rᵢ/10)) / ΣArea]
Output
dB (negative = attenuation) — composite sound reduction index per band
Bands
Follows the input spectrum
Standard / Source
General acoustics (no standard cited)
Access
Toolbar block

What it does

Combines the sound reduction indices of several building elements (e.g. a solid wall plus a much weaker door or window) into a single area-weighted composite transmission loss — the figure that actually governs sound transfer through the assembly, since the weakest element dominates far more than a simple average would suggest. Ribbon: Buildings → Sound Insulation → Composite Transmission Loss. Its result is the composite TL that Outside → Inside (BS 8233) takes as input.

Equation

Rtotal=−10log⁡10 ⁣(∑iSi⋅10Ri/10∑iSi)R_{\text{total}} = -10\log_{10}\!\left(\frac{\sum_i S_i \cdot 10^{R_i/10}}{\sum_i S_i}\right)

Si = area of element i (m²), Ri = sound reduction index of element i (dB, negative in Timbral's convention — the same sign convention as Mass Law). A band is only reported when every element with a non-zero area has an SRI value at that frequency; until then that band is left blank (a missing value is never treated as a perfect barrier).

Inputs

InputMeaningUnitExample
Building elementsN element rows held inside the block (the insert dialog asks only for N, default 3; the rows start blank). Each row holds that element's area (Notes cell) and its SRI spectrum (band cells) — type them in, or bind the row to a published variablem² / dB10 m² wall + 2 m² door

Worked example

Wall (10 m², well-insulated) + door (2 m², weak) — note how the door pulls the composite well below the wall's own SRI:

Band (Hz)1252505001000
Wall R (dB)−40−42−45−50
Door R (dB)−18−19−20−25
Composite R (dB)−25.65−26.67−27.71−32.71

At 500 Hz, for example, the wall alone would give −45 dB, but the 2 m² of door (17% of the area, but transmitting ~10,000× more energy per m²) drags the composite down to −27.71 dB.

Source

Standard area-weighted transmission-coefficient combination (general acoustics — no specific standard cited in the code, same convention family as Mass Law and Room-to-Room Sound Transfer).

Register interest

Tell us a little about you and we'll be in touch when Timbral is ready.